Pictbridge : Picture Selection - Samsung DIGIMAX A503 User Manual

Hide thumbs Also See for DIGIMAX A503:

User manual (71 pages)

Table Of Contents

Table of Contents

Enlarged version

PictBridge

■You can use the USB cable to connect this camera to a printer that supports

PictBridge (sold separately) and print the stored images directly. Movie clips and

voice files cannot be printed.

●Connecting the Camera to a Printer

1. Slide the power switch to turn the camera power on.

2. Use the supplied USB cable to connect the camera

to the printer as shown below.

3. Turn on the printer to connect the camera to the

printer.

4. A window for selecting an external device will

display on the LCD monitor.

5. Select [PRINTER] menu by pressing the Up/ Down button and press the OK

button.

※ If you selected [COMPUTER] in Step 5, when you connect the camera to your

printer, the [CONNECTING COMPUTER] message will display and the

connection will not be established. In this case, disconnect the USB cable, and

then follow the procedure from Step 2 and onward.

《46》

■Select pictures to print

1. Use the LEFT and RIGHT buttons to select the

[IMAGE] menu tab.

2. Use the UP and DOWN buttons to select the

desired sub menu value, and then press the OK

button.

When [ONE PIC] is selected

CONNECTING PRINTER

: The PictBridge function will be applied only to

the picture currently displayed.

When [ALL PICS] is selected

: The PictBridge function will be applied to all pictures, excluding movie clips

and voice files.

●Setting the Number of Copies to Print

- Select [ONE PIC] or [ALL PICS]. A screen where you can set the number of

copies to print will appear as shown below.

[ When [ONE PIC] is selected ]

- Press the Up/ Down button to select the number of prints. Maximum 30 prints.

- When you select [ONE PIC] menu, use the Left/ Right button to select another

picture and select the number of prints for another picture.

- After setting the number of prints, press the OK button to save.

- Press the Shutter button to return to the menu without setting the number of

prints.