Table of Contents
Advertisement
Setup menu
[ Imprinting the recording date ]
■ There is an option to include DATE/ TIME on still
images.
● Sub menus
[OFF]
: The DATE & TIME will not be
imprinted on the image file.
[DATE]
: Only the DATE will be imprinted
on the image file.
[DATE & TIME] : The DATE & TIME will be
imprinted on the image file.
[ Connecting an External Device (USB) ]
■ You can select an external device to which you want to connect the camera
using the USB cable.
● Sub menus
- [COMPUTER] : Select this if you want to connect
the camera to your PC. Refer to
page 62 for instructions on how
to connect the camera to yourPC.
- [PRINTER]
: Select this if you want to connect
the camera to your printer. Refer
to page 44 for instructions on
how to connect the camera to
your printer.
《52》
[ BEEP ]
■ If you set the operation beep to ON, various beeps will be activated for camera
startup, when buttons are pressed, so that you can be aware of the camera
SETUP
operation status.
FORMAT
DATE
OFF
● [BEEP] sub menu : OFF/ ON
TIME
DATE
IMPRINT
DATE &TIME
BACK:
SET:OK
[ LCD brightness ]
■ You can adjust the LCD brightness.
● [LCD] sub menu : DARK, NORMAL, BRIGHT
[ Quick view ]
SETUP
■ If you enable Quick View before capturing an image, you can view the image you
DATE
just captured on the LCD monitor for the duration set in the [Q.VIEW] setup.
TIME
Quick view is possible only with still images.
IMPRINT
COMPUTER
USB
PRINTER
BACK:
SET:OK
● Sub menus
[OFF]
[0.5, 1, 3 SEC]: The captured image is briefly
: The quick view function can't be
activated.
displayed during the selected time.
SETUP
TIME
IMPRINT
USB
OFF
BEEP
ON
BACK:
SET:OK
SETUP
IMPRINT
USB
DARK
BEEP
NORMAL
LCD
BRIGHT
BACK:
SET:OK
SETUP
USB
OFF
BEEP
0.5SEC
LCD
1SEC
Q.VIEW
3SEC
BACK:
SET:OK
Hide quick links:
Advertisement
Table of Contents
