Osd (On Screen Display) Information; Starting Play Mode; Playing Back A Still Image - Samsung DIGIMAX L80 User Manual

OSD (On Screen Display) information

In any mode with the exception of VOICE
RECORDING mode, you can check the recording
status in the LCD monitor.
Idle mode : If you select the [LCD Save] and the camera isn't operated during
the specified time (about 20 SEC.), the camera power will be idle (LCD monitor :
OFF, Camera status lamp : Blinking) automatically. To use the camera again,
press any of the camera buttons except the power button. If there is no operation
during the specified time, the camera power will be turned off automatically to
save battery life.
Refer to page 60 for more information about the auto power off function.
[Full information]
40
OSD INFORMATION
Full
Basic
LCD Save
[Basic information]

Starting play mode

If the memory card is inserted in the camera, all the camera functions apply only
to the memory card.
If the memory card is not inserted in the camera, all the camera functions apply
only to the internal memory.
If you have turned on the camera by pressing the POWER button, you can press
the PLAY MODE button once to switch to Play mode and press it again to switch
to Recording mode.
You can turn the power on with the play mode button. The camera is turned on in
play mode. Press the play mode button again and the camera will be turned off.
You can set up the PLAY mode function by using the camera buttons and LCD
monitor.

Playing back a still image

1. Select the PLAY mode by pressing the
play mode button ( ).
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to play
back by pressing the LEFT/ RIGHT
button.
Press and hold the Left or Right button to
fast forward the images played.