Worksheet Entry - HP 98568A Installation Instruction

HP 98627 A Color Output Interface
Worksheet Entry
You have now installed the HP 98627 A Color Output Interface.
The following table contains information needed to use the Color Output
Interface with the HP-UX operating system.
Copy this select code to a worksheet (worksheets are found at the end of
Chapter 1, "Getting Started") or simply remember to refer here when you
need it. If you changed the select code in step 2-b, write in your new select code
instead of 28.
When finished, you'll be ready to install your next peripheral or interface.
Table 5-11.
Interface N arne Select Code
HP 98627A 28
HP-UX Notes
• The character mode major number for the Color Output Interface is 12 .
• A typical mknod for a Color Output Interface at select code 28 (the default)
IS:
#
mknod /dev/graphics c 12 Oxic0200
The 1c represents select code 28 (Ic is hexadecimal for 28).
Adding Interface Cards 5-55