HP 98568A Installation Instruction page 407

HP 98700 Graphics Display Station
Installation Procedure
1. Turn your computer off and remove the power cord.
2. If you have the HP 98710A Graphics Accelerator, follow these steps to
connect it:
a. Turn off the HP 98700A and remove the power cord.
b. Remove the cover plate on the front bottom of the HP 98700 and place it
in the parking position provided (see Figure 8-3).
Figure 8-3.
Removing the Cover Plate
c. Move the locking mechanism on top of the HP 98710A to the rear.
Adding Plotters
&
Other 8-13
Graphics Devices