Loading Plain Paper / Photo Paper - Canon MX450 Series Online Manual

Loading Plain Paper / Photo Paper

You can load plain paper or photo paper.
Important
If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial print, it can
cause paper jams.
Note
We recommend Canon genuine photo paper for printing photos.
For details on the Canon genuine paper, see
You can use general copy paper.
For the page size and paper weight you can use for this machine, see
1. Prepare paper.
Align the edges of paper. If paper is curled, flatten it.
Note
Align the edges of paper neatly before loading. Loading paper without aligning the edges may cause paper
jams.
If paper is curled, hold the curled corners and gently bend them in the opposite direction until the paper
becomes completely flat.
For details on how to flatten curled paper, see "Load the paper after correcting its curl." in Paper Is Smudged/
Printed Surface Is Scratched.
When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at a time as it is.
If you roll up this paper to flatten, this may cause cracks on the surface of the paper and reduce the print
quality.
2. Load paper.
(1) Open the front cover gently, and extend the paper support.
(2) Use the right paper guide
(3) Load the paper in the center of the front tray WITH THE PRINT SIDE FACING DOWN.
Push the paper stack all the way to the back of the front tray.
Media Types You Can
(A) to slide both paper guides all the way out.
42
Use.
Media Types You Can Use.