Security Control - Canon MX450 Series Online Manual

Selects whether to print the received fax automatically when receiving a fax.
If you select Do not print, the received fax is stored in the machine's memory.
For details on the received fax stored in the machine's memory:
Document Stored in Machine's Memory
• Activity report
Selects whether to print ACTIVITY REPORT automatically.
If you select Print, the machine prints ACTIVITY REPORT for the 20 histories of sent and received faxes
automatically.
For details on the procedure to print ACTIVITY REPORT manually:
Summary of Reports and Lists
• TX report
Selects whether to print TX REPORT/ERROR TX REPORT automatically after sending a fax.
If you print the report, select Print error only or Print for each TX.
If you select Print error only or Print for each TX, you can specify the print setting that the first page of the fax is
printed along with the report.
• RX report
Selects whether to print RX REPORT automatically after receiving a fax.
If you print RX REPORT, select Print error only or Print for each RX.
• Print when no ink
Sets whether to continue printing the received fax without storing it in the machine's memory when the ink has run
out.
However, part or all of the fax may not be printed since the ink has run out.
Auto save setting
Selects whether to save the received fax on the USB flash drive automatically after receiving a fax.
Saving Received Faxes Automatically on a USB Flash Drive

Security control

• FAX no. re-entry
If you select ON, you can set the machine to send faxes after using the Numeric buttons to enter the number twice.
By using this setting, you can avoid the mistransmission of faxes.
• Check RX FAX info
If you select ON, the machine checks whether the recipient's fax machine information matches the dialed number. If it
matches the number, the machine starts to send faxes.
Preventing Mistransmission of Faxes
• On-hook setting
If you select Enable, you can use the on hook function.
• FAX RX reject
If you select ON, the machine rejects the reception of faxes with no sender information or faxes from specific
senders.
Rejecting Fax Reception
• Caller rejection
If you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's ID matches the
condition specified in this setting, the machine rejects the phone call or fax reception from the sender.
If you select Subscribed, you can specify the settings of rejection.
Using the Caller ID Service to Reject Calls
Note
120