Channel Mode; Cleaning And Maintenance - PROEL PLML150E User Manual

8 CHANNEL MODE

Selicting the 8 bit mode (see the paragraph above), the moving head loses
the last 3 DMX channels and it will have totally 8 channels.

CLEANING AND MAINTENANCE

DANGER OF LIFE!
Disconnect
operation!
Maintenance and service operations are only to be carried out by
authorized persons once a year.
We recommend a frequent cleaning of the device. Please use a moist, lint-
free cloth. Never use alcohol or solvents.
The cooling-fans should be cleaned monthly. The interior of the fixture
should be cleaned at least annually using a vacuum-cleaner or an air-jet.
The dichroic colour-filters, the gobo-wheel and the internal lenses should
be cleaned monthly. To ensure a proper function of the gobo-wheel, we
recommend lubrication in six month intervals.
Replacing the fuse Replacing the fuse Replacing the fuse Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of
same type and rating.
- Step 1: Open the fuse holder on the rear panel with a fitting screw
driver.
- Step 2: Remove the old fuse from the fuse holder.
- Step 3: Install the new fuse in the fuse holder.
- Step 4: Replace the fuse holder in the housing.
If the power supply cable of this device becomes damaged, it has to be
replaced by a special power supply cable available at your dealer.
24
from mains before starting maintenance