Safety Instructions - PROEL PLML150E User Manual

SAFETY INSTRUCTIONS

This device has left our premises in absolutely perfect condition. In order
to maintain this condition and to ensure a safe operation, it is absolutely
necessary for the user to follow the safety instructions and warning notes
written in this user manual.
Important: Important:
Important: Important:
Damages caused by the disregard of this user manual are not subject to
warranty.
Do not use this product in environment where the temperature is under
0°C or over 45°C. The arising condensation water might damage your
device.
Please make sure that there are no obvious transport damages. If you
notice any damages on the product, do not connect the device to the
mains and immediately consult your dealer.
This device falls under protection-class I. The power plug must only be
plugged into a protection class I outlet.
Assure that the voltage and frequency values are suitable with the same
data printed on the device.
Never let the power-cord come into contact with other cables. Handle the
power-cord and all connections with the mains with particular caution.
Never touch them with wet hands, as this could lead to mortal electrical
shock.
Never modify, bend, strain mechanically, put pressure on, pull or heat up
the power cord.
Never pull out the plug by tugging the power-cord.
All warnings concerning the power cords are also valid for possible
extension cords.
Always disconnect from the mains, when the device is not in use or before
cleaning it.
If the power plug or the device is dusty, the device must be taken out of
operation. Proceed to cleaning by following the relative paragraph.
There must never enter any liquid into power outlets, extension cords or
any holes in the housing of the device. If you suppose that also a minimal
amount of liquid may have entered the device, it must immediately be
disconnected. This is also valid, if the device was exposed to high
humidity.
There must never be any objects entering into the device. This is especially
valid for metal parts. If any metal parts like staples or coarse metal chips
16