Features; Installation - PROEL PLML150E User Manual

FEATURES

- 8 channels or 11 channels mode selectable
- 7 different dichroic colour-filters and white
- Rainbow-effect with adjustable speed in both directions
- Gobo-wheel with 7 interchangeable gobos + open
- Shake effect
- Motorized focus
- 150 W discharge lamp

INSTALLATION

Installing/Replacing the lamp Installing/Rep Installing/Rep Installing/Rep lacing the lamp lacing the lamp lacing the lamp
DANGER TO LIFE! UNPLUG FROM MAINS BEFORE OPERATING!
Only install the lamp with the device switched off!
The lamp must only be changed when wearing appropriate protective
clothing (protection glasses, protection gloves, helmet with sight, leather
apron).
CAUTION! The lamp has to be replaced when it is damaged or
deformed.
The lamp life given by the manufacturer must NEVER be exceeded.
During the operation, the lamp reaches temperatures of up to 600° C.
After switching off the appliance, allow the lamp to cool down (approx. 10
minutes).
Do not install any lamp with different specifics from that one indicates in
this manual.
Procedure: Procedure:
Procedure: Procedure:
- Step 1: Unscrew the four screws on the rear part of the head;
- Step 2: Carefully remove the lamp holder;
- Step 3: If replacing the lamp, remove the old lamp from the lamp holder;
- Step 4: Insert the new Master Colour CDM-SA/T 150W/942 lamp;
- Step 5: Close the cover;
- Step 6: Tighten the four housing screws.
18