Operating Determinations - PROEL PLML150E User Manual

enter into the device, the device must be taken out of operation and
disconnected immediately.
Caution: During the operation, the housing becomes very hot.
Do not switch the device on and off in short intervals as this would reduce
the lamp's life.
HEALTH HAZARD!
Never look directly into the light source in order to avoid
injures to eyes.
Never leave this device running unattended.

OPERATING DETERMINATIONS

This PLML150E is a lighting effect for creating decorative effects. This
product is only allowed to be operated with an alternating voltage of
230V, 50Hz (120V , 60Hz on request) and was designed for indoor use only.
Do not shake the device. Avoid brute force when installing or operating
the device.
When choosing the installation-spot, please make sure that the device is
not exposed to extreme heat, moisture or dust. Moisture or very high
humidity can reduce the insulation and lead to mortal electrical shocks.
Keep the device off form smoke, dust or steam.
The relative humidity must not exceed 50 % with an ambient temperature
of 45° C.
The symbol
objects. The minimum distance between light-output and the illuminated
surface must be more than 0.5 meters.
In order to safeguard sufficient ventilation, leave 10 cm of free space
around the device.
Always fix the fixture with an appropriate safety-rope.
Use the original packaging if the device is to be transported. Never
remove the serial barcode from the carton box as this would make the
guarantee void.
Consider that unauthorized modifications on the device are forbidden due
to safety reasons!
determines the minimum distance from lighted
17