How To Operate Memory Cooking; Double Quantity Pad Programming - Samsung CM1029A Owner's Instructions And Cooking Manual

Commercial microwave oven
Table of Contents

Advertisement

How to Operate Memory Cooking

After having finished memory programming, just press the NUMBER
pad of the memory number you want to select. The oven will
automatically start heating according to the pre-programmed cooking
time and power level.
1. Make sure the oven is plugged into a properly earthed
electrical outlet and "ON" appears in the display window.
2. Open the door.
The oven lamp will be turned on.
3. Put the food into a suitable container, place it in the
centre of the oven and then close the door securely.
Result :
4. Press NUMBER pad.
Result :
The oven lamp will go off.
The selected memory program automatically
starts heating. But, NUMBER pad 1, 2 operate
after 2 seconds.

Double Quantity Pad Programming

1. Hold down
for 2 seconds.
2. Select desired program code by using NUMBER pads.
3. Press NUMBER pads to set the magnification factor
within the range from 1.00 to 9.99.
u
4. Press
u
Press CANCEL(
Though you can successfully set a double quantity factor whose
setting might result in excess of the maximum time allowed for each
power level, the oven does not operate exceeding the maximum time.
11
and then press
pad. Hold together
Default factor is 1.65 preset from the
manufacturer for increasing the cooking time.
Make sure that you set a correct factor between
1.00 and 9.99 for each memory code number.
button.
) pad to exit the programming mode.
EN

Advertisement

Table of Contents
loading

Table of Contents