Installing Your Smart Oven; Setting The Time - Samsung BCE1197 Owner's Instructions And Cooking Manual

Installing Your Smart Oven

This smart oven can be placed almost anywhere (kitchen work
GB
surface or shelf, movable trolley, table).
1. When you install your oven, make sure there is adequate
20cm 10cm
behind
above
ventilation for your oven by leaving at least 10 cm
(4 inches) of space behind, and on the sides of the oven
and 20 cm (8 inches) of space above the oven and 85 cm
10cm on
85 cm
the side
of the floor
(33 inches) of the floor.
2. Remove all packing materials inside the oven.
Install the roller ring and turntable.
Check that the turntable rotates freely.
3. This smart oven has to be positioned so that plug is
accessible.
☛
Never block the air vents as the oven may overheat and
automatically switch itself off. It will remain inoperable until it has
cooled sufficiently.
☛
For your personal safety, plug the cable into a 3-pin, 230V, 50Hz, AC
earthed socket. If the power cable of this appliance is damaged, it
must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
☛
Do not install the smart oven in hot or damp surroundings like next to
a traditional oven or radiator. The power supply specifications of the
oven must be respected and any extension cable used must be of the
same standard as the power cable supplied with the oven. Wipe the
interior and the door seal with a damp cloth before using your smart
oven for the first time.

Setting the Time

1. Plug your oven into a standard household socket.
Result:
2. Set hour by using ( / ) button.
Result:
3. Press the Start/Scan On button.
Result:
4. Set minute by using
Result:
5. Press the Start/Scan On button.
Clock set is finished.
6
LCD : SET HOUR / .
LCD : SET HOUR /
/ PRESS START
LCD : SET MINUTE /
/ PRESS START
/ button.
LCD : PRESS START