Advertisement
After SW update, go to Design Menu by
8
Pressing MENU => AUDIO MENU => 8 5 3 2
Go to Setup design menu and Select Clear
9
EEPROM option and press OK key of remote.
After Clear EEPROM, the set will go to stand
10
by and will again restart automatically in RF
source.
Then verify the modelwise Audio/ Video
settings as per Design data (in PLM). Verify
11
the SW date and version in Version info in
Design data
Then press Shipping in Setup design menu by
pressing OK key of remote, after shipping set
displays "SHIPPING FINISH" message, then
12
Switch OFF the set from main power and
again Switch ON. The SW loading process Is
complete.
37
Advertisement
