Advertisement
Overscan
H-position
H-size
V-position
V-size
Reverse
Panel Type
LVDS Mapping
Design Set
Panel
Back Light
Control
Way
Backlight
Reverse
Back Light
Curve
Note:-
1) Video settings for Different source may be different
depending on auto white balance settings and may vary panel
to panel.
2) The Video design data is set to match the best value with
measurement. If change this data, then it may affect on the
picture performance.
3) If there is picture cut problem, please use Just scan option in
setting user menu and if required change the overs can
option in design data.
RF
AV1/AV2
Off
Panel selection parameter. After selection of
proper panel type, it automatically selects all
panel parameters.
Selection for LVDS
mapping 0 or 1
Design data selection
Backlight type selection
for DC/PWM
Parameter used for
positive or negative
backlight variation
To adjust Backlight
curve 0-255
YPbPr
VGA
Depend on panel
Scroll for design set
selection
Depend on Panel
Off
Depend on Panel
HDMI
USB
29
Advertisement
