Advertisement
Mode
Parameter
FEATURE
SETUP
SWITCH
Note: -
1.) The design parameters may vary depending on model. So, kindly follow the
design data provided with each model.
2.) Clear EEPROM option is at first position in setting design data, so care should
be taken that OK key should not be pressed here, unless and until required.
3.) E-OPS & Key indicator are not applicable in SANSUI models.
Sub
Default Data
Parameter
Demo EOPS
EOPS MODE
Demo EOPS
Icon Num.
Pos 1 to 6
CEC
ON
Function
ARC
OFF
Hotel Mode
ON
Timer Menu
OFF
Blue Back
OFF
USB mode
Movie USB
Key Indication
Position
Key
Key Indication
Indication
Start
Setting
Pos 1 to 7
Key 1/2 Gap
Key 2/3 Gap
Key 3/4 Gap
Key gap
Key 4/5 Gap
Key 5/6 Gap
Key 6/7 Gap
MHL Function
Stand by banner
Description
To make E-OPS ON/OFF
To select different default E-
OPS combinations.
Select no. of functions in E-OPS
To define function to display on
different positions.
To make CEC function ON/OFF
To make ARC function ON/OFF.
To make Hotel mode ON/OFF
To make Timer menu ON/OFF.
Default is OFF.
To make Blue Back ON/OFF
To select JPEG/MPEG USB.
To select position of key
indicator on screen
To set position of indicator
To set functionf on different
positions of Key press
indicaator, as per model
To maintain gap between
different key indicators.
This is enable/disable MHL
function
This will show Active/Cold start
banner every time when make
stand by.
32
Advertisement
