Advertisement
SW INSTALLATION PROCEDURE
The ATV SW installation in DDB DLX chassis can be done with USB in three ways.
1.) SW Installation through USB in Set stand by condition.
2.) SW Installation through USB in Set ON condition.
3.) SW Installation through MST Tool.
A.) SW INSTALLATION THROUGH USB IN STAND BY CONDITION: -
Copy the SW (.bin) file in USB to root
1
directory.
Rename the SW file name as "videocon.bin"
2
for Videocon brand TV and "sansui.bin for
SANSUI brand TV.
3 Keep the TV set in Power OFF condition.
4 Plug in the USB drive in USB port of the TV.
5 Turn ON the Mains power of TV set.
Now after a few sec., RED LED indicator of
6
TV will start blinking, indicating the SW is
loading.
After a few sec. LED blinking will stop and
7
SW loading is finished. Then follow below
steps.
36
Advertisement
