Reversing The Door; Required Tools - Samsung RL56GPGBP User Manual

595mm
at least
50mm
115
960mm
• H eight of the product may be different
depending on the models.
• A llow clearance to the right, left, back and top
when installing.
This will help reduce power consumption and
keep your energy bills lower.
• D o not install the Refrigerator where the
temperature will go below 50ºF (10ºC).

REvERSING THE dOOR

Before you reverse the refrigerator door, make
sure to unplug the refrigerator. If this operation
is not performed by After sales service, it is not
covered by the warranty.
1. B efore attempting to reverse the refrigerator
doors ensure that the refrigerator is
disconnected from the main electricity supply
and all food stuffs are emptied from inside the
appliance.
2. I f the customer does not feel confident to follow
instruction in the user manual, a Samsung
qualified service engineer must be contacted to
carry out this change.
3. Do not plug in Refrigerator just after door
reverse finished process and wait for at least
one hour.

Required Tools

Not provided
Phillips Head Flat Head
Driver (+) Driver (-)
Not provided
3/16" Allen
11mm Wrench
Wrench (for
(for hinge shaft)
middle hinge)
1. Remove the Hinge Cover and detach the
sensor from the right Hinge Cover.
at least 584mm
50mm
1,202mm
2. Remove bolts ( ① ) and disconnect the wire ( ② ).
3. R emove the Wire Covers ( ① ) and Door
Cover ( ② ).
4. Remove the Hinge and detach Hinge Case
from the hinge. Pull the wires out from the
Hinge Case.
5. Remove the fridge door from the Middle hinge
by carefully lifting the door straight up.
10mm Socket
Wrench (for bolts)
Additional part
Top Left Hinge
Case (Underneath
CAUTION
the Cover Hinge)
①
②
The door is heavy, be careful not to
injure yourself when removing the door.
②
①
_7
Setting up