Required Tools - Samsung RL52VPBIH User Manual

REVERSING THE
REFRIGERATOR DOOR
Before you reverse the refrigerator door,
make sure to unplug the refrigerator.
WARNING
If this operation is not performed by After sales
service, it is not covered by the warranty.

Required Tools

Not provided
Phillips Head Flat Head
Driver (+) Driver (-)
Not provided
3/16" Allen
11mm Wrench Wrench
(for hinge shaft) (for middle
1. Remove 4 screws on the Top cover of the
refrigerator.
Screw
Make sure your refrigerator is unplugged
before handling electrical wires.
WARNING
2. Remove the Top cover. Make sure to disconnect
the wire underneath the Top cover.
Be careful not to damage the electrical wires
when removing the Top cover.
CAUTION
08_ setting up
DA99-02116A(0.4)-EN.indd 08 DA99-02116A(0.4)-EN.indd 08
10mm Socket
Wrench
(for bolts)
Additional part
Top Left
Hinge Cover
(Underneath the
hinge) Top Cover)
3. Disconnect the wire and then remove 3 bolts on
the top of the refrigerator.
Make sure the Fridge door is closed fi rmly.
CAUTION
4. Remove the Fridge door from the Middle hinge
by carefully lifting the door straight up.
Fridge door is heavy, be careful not to injure
yourself when removing the Fridge door.
CAUTION
5. Disassemble the Middle hinge by removing 2
bolts and a screw on the right side.
Remove the Freezer door from the Bottom hinge
by carefully lifting the door straight up.
Freezer door is heavy, be careful not to
injure yourself when removing the Freezer
CAUTION
door.
Middle hinge
Middle hinge
Bottom hinge
2011.7.14 5:26:3 PM 2011.7.14 5:26:3 PM