Do You Want To Change The Daily Heating Periods - Siemens Synco 700 Operating Instructions Manual

Do you want to change the daily heating periods?

General information about the heating program
In the heating program, you can set the daily heating
periods to suit your individual needs. Each day can
accommodate a maximum of 6 switching points; a room
setpoint must be assigned to each heating period.
In addition to the weekdays (Monday through Sunday),
you can program a special day, that is, a special 24-hour
heating program.
The special day will be activated when you make an
entry on the Holidays/special days menu (
If your plant comprises several heating circuits, you can
set the heating program for every heating circuit sepa-
rately (e.g. path: ... > Time switch 2 > ... ).
Changes on the controller can be made only if the heat-
ing program is predefined by the time switch in the
controller. Otherwise, it is an external operator station.
10
Building Technologies / HVAC Products
page 20).
Path for RMH760B:
Main menu > Heating circuit ... > Time switch ...
Path for RMK770:
Prior to making entries, please observe
• First, always enter the start time of the heating period,
then the room operating mode of that period
• You have room operating modes
choose from. Adjust the associated setpoints on the
Room setpoints menu (
• You can copy any 24-hour heating program to other
days ( page 11)
Changing and canceling times and setpoints
1. Select the required day.
2. In the diagram, advance pointer
time to be changed.
3. Set the required time.
Canceling the time: Reset the time via 00:00 until
––:–– appears.
4. Select the required setpoint.
5. If required, set additional times and select additional
setpoints.
Main menu > Time switch ...
CE1B3133x2-en
, and
page 13)
to the point in
74 319 0560 0 a
to
10.10.2006