Advertisement
Step 6:
Prepare your Template (INCLUDED) by adhereing both template pages to one another on the dashed line.
STEP 7: Turn Table Upside down.
Draw 2 horizontal lines across the
table bottom, so line 1 is a con-
stant 6.25" inches from the front
and line 2 is a constant 6.25" from
the back. See photo on the right.
STEP 9:
Mark the 4 holes from the template
on the table top. Flip the instructions to the
right side of desk and repeat this step. These
4 marks will be for the left and right arms of
the spider.
IMPORTANT NOTICE
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have a ll parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
Any problems or questions please call Regency Office Furniture at 1-866-816-9822
1
2
STEP 10: Align spider over marks
made in step 8 and drill 8 screws
in per T-base. Flip Table over when
complete.
STEP 8:
Place Instructions
upside down so the template
can been read in between the
lines to the left edge of the
desk.
STEP 11: To attach corner TTCNR24
please follow the instructions on
the back of this page.
Black Dots represent where screws
are placed.
Advertisement
