Usb Interface; System Requirements - Samsung VP-MX10 User Manual

USB interface

This chapter explains how to connect a PC using the USB cable for various actions.
-To connect an USB cable to a PC, refer to the software installation instructions and available PC specification.

SYSTEM REQUIREMENTS

Transferring a Digital Image through a USB Connection
The memory camcorder supports USB 2.0 High speed. (Depends on the PC specification)
•
• You can transfer a recorded file in storage media to a PC via a USB connection.
If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0) supplied with the
•
memory camcorder.
USB Connection Speed (depending on the System)
High speed USB connection is supported by Microsoft (Windows) device drivers only.
•
Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.
•
Windows XP - High speed USB on a system with Service Pack 1 or later installed.
•
• Windows Vista - High speed USB on a system with Service Pack 1 or later installed.
System Requirements
Windows operating systems
CPU: Intel® Pentium 4
•
• Operating systems: Windows® 2000/XP/Vista
Standard installation is required. If you have upgraded your current operating system, we can not guarantee
the proper operation of the product.
Memory: 512MB RAM or higher
•
Hard Disk: 2GB or higher
•
• Resolution: 1024x768 dots, 24bit colour
USB port: USB2.0 High Speed
•
- System requirements mentioned above are recommendations. Even on a system that satisfies the requirements
may not ensure the operation depending on the system.
- This memory camcorder is recognised as a removable storage device on the Macintosh computer.
(Mac OS 10.3 or above supporting the High Speed USB standards)
, 2GHz or higher, or the equivalent
™
English _69