Samsung VP-MX10 User Manual page 22

preparation
To check the remaining battery charge
When the camcorder is turned off (battery is installed) press and release the
•
button to display the remaining capacity of the battery capacity.
• When the camcorder is turned on (battery is installed) press and hold the
button for more than 2-3 seconds to display the remaining
battery capacity. Press the
return to the initial OSD while the battery information is displayed.
When the battery is installed and the AC adapter is connected,
•
if you press
is displayed.
When the AC adapter alone is connected, pressing the
•
button will display "NoBattery" message.
16_English
button again or any other button to
button, the remaining battery capacity
Battery
0% 50%
154 Min
Memory (Super Fine)
120 Min 60 Min
Recording capacity (approx.)
Remaining battery(approx.)
100%