Copy; Copying Movie Images (Vp-Mx10A/Mx10Au/Mx10Ah Only - Samsung VP-MX10 User Manual

playback options

COPYING MOVIE IMAGES (VP-MX10A/MX10AU/MX10AH ONLY)

• Movie images are copied to the destination storage with leaving original movie images in the source storage.
• It copies from the currently-used memory to another. For example, if the built-in memory was used, it copies to a memory card.
1. Slide thePOWER switch downward to turn on the memory camcorder.
Set the appropriate storage media. (VP-MX10A/MX10AU/MX10AH only)
•
(If you want to record on a memory card, insert the memory card.)
2. Press the MODE button.
Switches to Movie Play mode.
•
Select the desired movie images, using the Controlbutton.
•
3. Press the MENU button.
Menu screen appears.
•
4. Press the Control button (
5. Select an option by pressing the Control button (
the OKbutton.
item
Copies the selected movie images.
"OK"
Copies the individual movie images.
- To copy individual movie images, select desired movie
images by pressing the OK button.
"MultiSelect"
- The indicator (
images. And then press the MENU button to confi rm.
- Pressing the OK button toggles the selection and release.
Copies all the movie images.
"All"
6. The pop-up selection menu will appear depending on the selected menu item.
In this case, select the desired item with the Control buttons (
the OK button.
While the menu or thumbnail image screen is displayed, pressing the
•
Recordingstart/stopbutton will move to Movie Record mode.
It operates identically in the single image display.
•
If a memory card is not inserted, you can not perform the "Copy" function.
•
60_English
page 21
➥
/ ) to select "Copy".
contents
) is displayed on the selected movie
/ ) and then press
/ ) and
100-0003
Move Play
OK
100-0003

Copy

OK
Multi Select
All
Move Select
OK MENU
100-0003
Copy
OK
Multi Select
All
Move Select
OK MENU
120
MIN
120
MIN
Exit
120
MIN
Exit