Scanning Originals And Sending Via Samsung Network Scan Manager (Netscan); Preparation For Network Scanning; Scanning And Sending Via Netscan; Scanning Originals And Sending Via Smb/ Ftp (Scan To Server) - Samsung SCX-6345N User Manual

2 Press a, b, c, d, e, f, g.
3 Press @.
4 Press a, b, c.
5 Press . and press c, o, m.
Note
to enter contents in other fields, press
keyboard.
6 Press OK after finishing all the contents.
Scanning originals and sending via Samsung
Network Scan Manager (NetScan)
You can scan an image on the machine via the Network Scan program
which is installed in your networked computer.

Preparation for network scanning

Make sure the printer software is installed on your computer using the
Printer Software CD-ROM, since the printer software and should include
the Network Scan program. See page 3.2 for detailed information on
installation steps.
1 In Windows, select Start > Programs > Samsung Network Printer
Utilities > Network Scan > Network Scan.
The Samsung Network Scan Manager window opens.
2 Click the Add Device button.
3 Click Next.
4 Select Connect to this scanner and enter the IP address of your
machine.
Or select Browse for a scanner. (recommended) to show a list of
scanners on your network.
5 Click Next.
6 Select your machine from the list and enter a name, user ID, and
PIN (Personal Identification Number) for the machine.
Note
• The model name of your machine is automatically entered as
the scanner name, but it can be changed upon your need.
• The ID can be entered up to 8 characters. The first character
must be a letter.
• The PIN must be of 4 digits.
7 Click Next.
8 Click Finish.
Your machine is added to the scanner list of the Network Scan
program and you can now scan images through the network.
Note
You can change the scanner properties of your machine and the
scan settings from the Samsung Network Scan Manager
window. Click Properties and set the options in each tab.

Scanning and sending via NetScan

on the
1 Make sure that your machine and the computer are connected to a
network and Samsung Network Scan Manager is running on the
computer.
2 Place the originals face up in the DADF. Or you can place a single
original document face down on the scanner glass.
3 Press Scan from the Main screen.
4 Press NetScan.
5 When the authentication message pops up, enter ID and
Password. ID and Password that are which you have entered
during the configuration of the Network Scan program. (Page 7.5)
When login is completed, the screen shows the NetScan server
address which is the networked computer. Additionally, this shows
Application list that is configured in Samsung Network Scan
Manager.
6 Select one from the application list and press Select.
7 Press Start on the control panel to start scanning.
8 The original will be scanned and sent to your computer.
Scanning originals and sending via SMB/ FTP
You can scan an image and send it to a total of 5 destinations via the SMB
or FTP.

Preparation for scanning to SMB/FTP

Select the folder and share it with the machine in order to receive the
scanned file.
Note
The next steps are for SMB server setting using SyncThru Web
Service, and the setting for FTP server is the same as SMB.
Apply the same steps for setting up the FTP server.
7.5
<Scanning>
Note
If the authentication message shows, enter User Name
and Password. This message shows only when the network
administrator has set the authentication in SyncThru Web
Service. (Page 10.6)
(Scan to Server)