Booklet Copying; Cover Copying; Transparency Copying - Samsung SCX-6345N User Manual

Note
To remove shadows of a book edge, press the Image tab >
Erase Edge > Book Center and Edges Erase.
3 Press the Advanced tab > Book Copy.
4 Select the binding option.
• Off: Disables this feature.
• Left Page: Prints left page of the book.
• Right Page: Prints right page of the book.
• Both Page: Prints both facing pages of the book.
5 Press OK.
6 Press Start on the control panel to begin copying.

Booklet copying

The machine automatically prints on both sides of the paper, when folded,
which produces a booklet with all of the pages in the correct sequence.
The machine will also reduce and correctly adjust the position of each
image to fit on the selected paper.
1 Load the originals face up in the DADF. (Page 4.1)
Note
The originals must be placed in the DADF in order to use this
feature.
2 Press Copy from the Main screen.
3 Press the Advanced tab > Booklet.
4 Press On to activate this feature.
5 Press OK.
6 Press Start on the control panel to begin copying.
Note
This feature is possible only with A4, Letter, Legal, Folio, Oficio,
JIS B5, ISO B5, Executive, A5 and Statement sized paper.

Cover copying

The machine automatically adds covers to your copied set using stock
taken from a different tray. Covers must be the same size and orientation
as the main body of the job.
1 Place the originals face up in the DADF. Or place a single original
face down on the scanner glass. (Page 4.1)
2 Press Copy from the Main screen.
3 Press the Advanced tab > Covers.
Note
Once you have set the Paper Supply option to Auto, you
cannot use this feature.
4 Press On to use this feature, and select detailed settings for each
option.
• Position: Selects whether the cover will be placed at the front,
back, or both.
• Cover Sheet: Selects whether the cover will be 1 sided, 2 sided, or
blank paper.
• Paper Source: Select the paper tray, where the cover sheet is
loaded.
5 Press OK.
6 Press Start on the control panel to begin copying.

Transparency copying

When you prepare transparencies for presentations, use this feature to
copy the information.
Note
Before you start this special copy job, set the tray's Paper Types
and Paper Size to Transparency.(Page 4.8)
1 Place the originals face up in the DADF. Or place a single original
face down on the scanner glass. (Page 4.1)
2 Load the right-sized transparencies into the tray you have set.
3 Set the paper type to Transparency.
4 Press Copy from the Main screen.
5 Press the Advanced tab > Transparencies.
6 Select Transparencies option.
• No Separator: Does not place separator sheets between
transparencies.
• Blank Sheet: Places a blank sheet between transparencies.
• Printed Sheet: Places the same image on the divider sheets as
printed on the transparency.
7 Select media sources, in case you selected either Blank Sheet or
Printed Sheet.
8 Press OK.
9 Press Start on the control panel to begin copying.
5.6
<Copying>