Installing Accessories; Precautions To Take When Installing Accessories; Installing A Memory Dimm - Samsung SCX-6345N User Manual

13

Installing accessories

Your machine is a full-featured model that has been optimized to meet
most of your printing needs. Recognizing that each user may have
different requirements, however, Samsung makes several accessories
available to enhance your machine's capabilities.
This chapter includes:
•

Precautions to take when installing accessories

•

Installing a memory DIMM

• Replacing the Stapler
• Enabling Fax feature after installing the fax option kit
Precautions to take when installing accessories
Disconnect the power cord
Never remove the control board cover while the power is being supplied
on.
To avoid the possibility of an electrical shock, always disconnect the
power cord when installing or removing ANY internal or external
accessories.
Discharge static electricity
The control board and internal accessories (network interface card or
memory DIMM) are sensitive to static electricity. Before installing or
removing any internal accessories, discharge static electricity from your
body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk round before
finishing the installation, repeat this procedure to discharge any static
electricity again.
Installing a memory DIMM
Your machine has a dual in-line memory module (DIMM) slot. Use this
DIMM slot to install additional memory.
Your machine has 256 MB of memory which can be expanded to 384 MB.
The order information is provided for optional memory DIMM.
(Page 12.1)
1 Turn the machine off and unplug all cables from the machine.
2 Open the control board cover by grasping it and slide toward you.
3 Completely open the latch on each side of the DIMM slot. Remove
the preinstalled memory DIMM.
4 Take out a new memory DIMM from the plastic bag.
5 Holding the memory DIMM by the edges, align the notches on the
memory DIMM with the grooves on the memory DIMM slot.
Note
The notches and grooves illustrated above may not match
those on an actual DIMM and its slot.
13.1
<Installing accessories>
1
1
control board cover
1
2
1
latch
2
memory DIMM