Power Button; Turning On The Machine - Samsung SCX-3200 Series User Manual

Stop/Clear button
By pressing Stop/Clear button, you can do the following functions.
FUNCTION
Printing a configuration In ready mode, press and hold this button
report long enough (about two seconds) until the
Status LED blinks slowly, and release the
button (See "To print a configuration report"
on page 24).
Printing a network In ready mode, press and hold this button for
configuration report four seconds until the Status LED blinks fast,
(SCX-3205W(K) only) and release the button (See "Printing a
network configuration report" on page 30).
Supplies information In the ready mode, press and hold this button
report for about 6 seconds until the Status LED is
on, and release (See "To print a supplies
information report" on page 24).
Canceling print job
Press
operation. The print job is cleared from both
the machine and the computer and then the
machine returns to ready mode. This may
take some time depending on the size of the
print job.

Power button

By pressing Power button, you can turn the machine on or off.

Turning on the machine

1. Plug in the power cord.
2. Press Power button on the control panel.
When the machine is powered on, you can see LED looping on the
display. Then, the machine is in ready mode.
If you want to turn the power off, press and hold this button for
about two seconds.
DESCRIPTION
Stop/Clear button during a
Introduction_ 23