Power Problems; Paper Feeding Problems - Samsung SCX-3200 Series User Manual

Power problems

Click this link to open an animation about solving power problems.
CONDITION
The machine is
• Plug in the power cord and press
not receiving
button on the control panel.
power,
or the connection
cable between the
computer and the
machine is not
connected
properly.
• Disconnect the machine cable and reconnect it.
- For Local Printing
- For Network Printing (SCX-3205W(K) only)
SUGGESTED SOLUTIONS
Power

Paper feeding problems

CONDITION
Paper jams during
printing.
Paper sticks
together.
Multiple sheets of
paper do not feed.
Paper does not feed
into the machine.
The paper keeps
jamming.
Transparencies stick
together in the paper
exit.
Envelopes skew or
fail to feed correctly.
Troubleshooting_ 81
SUGGESTED SOLUTIONS
Clear the paper jam (See "Clearing paper jams"
on page 78).
• Check the maximum paper capacity of the
tray (See "Print media specifications" on
page 93).
• Make sure that you are using the correct type
of paper (See "Print media specifications" on
page 93).
• Remove paper from the tray and flex or fan
the paper.
• Humid conditions may cause some paper to
stick together, replace with a new stack.
Different types of paper may be stacked in the
tray. Load paper of only one type, size, and
weight.
• Remove any obstructions from inside the
machine.
• Paper has not been loaded correctly.
Remove paper from the tray and reload it
correctly.
• There is too much paper in the tray. Remove
excess paper from the tray.
• The paper is too thick. Use only paper that
meets the specifications required by the
machine (See "Print media specifications" on
page 93).
• There is too much paper in the tray. Remove
excess paper from the tray. If you are printing
on special materials, use the manual feeder.
• An incorrect type of paper is being used. Use
only paper that meets the specifications
required by the machine (See "Print media
specifications" on page 93).
• There may be debris inside the machine.
Clean the machine inside (See Cleaning the
inside).
Use only transparencies specifically designed
for laser printers. Remove each transparency as
it exits from the machine.
Ensure that the paper guides are against both
sides of the envelopes.