Understanding The Status Led; Introducing The Useful Buttons; Menu Button; Power Button - Samsung CLX-3185 User Manual

UNDERSTANDING THE STATUS LED

The color of the Status LED indicates the machine's current status.
STATUS
Off • The machine is off-line.
• The machine is in power saver mode. When
data is received or any button is pressed, it
switches to on-line automatically.
• Wireless function can not be used.
Green Blinking • When the green LED slowly blinks, the
machine is receiving data from a computer.
• When the green LED blinks rapidly, the
machine is printing data.
On The machine is on-line and can be used.
Blue On When the machine is connected to a wireless
network, Wireless LED lights on blue
(CLX-3185FW only).
Red Blinking • A minor error has occurred and the machine is
waiting for the error to be cleared. Check the
display message. When the problem is
cleared, the machine resumes (See
"Understanding display messages" on
page 122).
• A small amount of toner is left in the cartridge.
The estimated cartridge life of toner is close.
Prepare a new cartridge for replacement. You
may temporarily increase the printing quality
by redistributing the toner (See "Redistributing
toner" on page 118).
On • A toner cartridge has almost reached the end
of its estimated cartridge life. It is
recommended to replace the toner cartridge
(See "Replacing the toner cartridge" on
page 136).
• A paper jam has occurred (See "Clearing
paper jams" on page 119).
• The door is opened. Close the door.
• There is no paper in the tray. Load paper in
the tray.
• The machine has stopped due to a major
error. Check the display message (See
"Understanding display messages" on
page 122).
Samsung does not recommend using a non-genuine Samsung toner
cartridge such as one that is refilled or remanufactured. Samsung
cannot guarantee a non-genuine Samsung toner cartridge's quality.
Service or repair required as a result of using non-genuine Samsung
toner cartridges will not be covered under the machine warranty.
Check the message on the display. Follow the instructions in the
message or refer to troubleshooting part (See "Understanding display
messages" on page 122). If the problem persists, call a service
representative.
All printing errors will be appeared in the Smart Panel program
window. If the problem persists, call a service representative.
DESCRIPTION
Introduction_ 36

INTRODUCING THE USEFUL BUTTONS

• Supported optional devices and features may differ according to
your model. Check your model name.
• Illustrations may differ from your machine depending on the model
or its options. Check your model name.

Menu button

When you want to know the machine status and set your machine to use an
advanced feature, click the Menu button (See "Machine status and
advanced feature" on page 103).

Power button

For CLX-3185 CLX-3185N and CLX-3185WK, plug the power cord into the
AC power outlet and press this button, the machine will be turned on. When
you want to turn the power off, press this button until Power Down appears
on the display. Choose Yes to turn the power off.
For CLX-3185FN and CLX-3185FW, plug the power cord into the AC power
outlet and then the machine will be turned on automatically.
When the machine goes into power save mode, Power button lights
on blue.
Print screen button (CLX-3185 only)
If you press Print Screen button for more than two seconds, the machine
prints the active windows displayed in the monitor.
If you press Print Screen button for less than two seconds, the machine
prints the whole monitor screen.
• The page will be printed on the default page like A4 or Letter.
• You can only use this function with a USB-connected machine.
• Print Screen can only be used with Windows and Macintosh
operating systems.
• You can only use this function if the machine driver is installed.
Eco Copy button (CLX-3185/CLX-3185N/CLX-318FN
only)
The Eco Copy function cuts toner consumption and paper usage. You can
configure Eco Copy function to adjust your paper savings and save setting
you want to use.
1. Press Menu on the control panel.
2. Press the left/right arrow until Copy Setup appears and press OK.
3. Press OK when Change Default appears.
4. Press the left/right arrow until Eco Copy appears and press OK.
5. Press the left/right arrow to select the mode you want.
• Mono Only: prints all original images in black and white mode.