WARNING injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: Non-Shock Lanyard may be used to support a MAXIMUM 1 PFAS for use in Fall Arrest applications ONLY when used in combination with compatible shock absorber extension. Always account for shock absorber extension length when calculating free fall.
WARNING applications when used with compatible shock absorber extension. Restraint: Non-Shock Lanyard may be used in Restraint applications. Restraint systems prevent workers from reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL. Structure must withstand loads applied in the directions permitted by the system of at least 1,000 lbs.
All connections must be selected and deemed compatible with Non-Shock Lanyard by a Competent Person. All connector gates must be self-closing and self-locking, and withstand minimum loads of 3,600 lbs.
1. Inspect Guardian Non-Shock Absorbing Lanyards and all PFAS equipment to be used in combination with Non-Shock Absorbing Lanyards. 2. Ensure that all connectors and all other components of the PFAS are compatible with Guardian Non-Shock Absorbing Lanyards, and are selected by a Competent Person. The selected safety harness MUST be of proper size, and MUST be fitted snugly, but still allow for a full range of movement.
6 months. Competent Person to inspect and initial. This inspection log must be specific to one Non-Shock Lanyard. Separate inspection logs must be used for each Non-Shock Lanyard. All inspection records must be made visible and available to all users at all times.
Safety Information Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, WARNING are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment.
Labels For use in Restraint or WARNING! Work Positioning applications ONLY. Make only safe Follow manufacturer’s and compatible instructions provided Non-Shock Absorbing connections. with this lanyard at Lanyard: time of shipment Compliant with all from manufacturer. applicable For use only with Fully read and Z359.3-17, ANSI other OSHA and ANSI...