Advertisement
Do not disconnect the power cord while using the monitor.
Do not use the power cord when the connector or plug is dusty.
To disconnect the apparatus from the mains, the plug must be pulled out
from the mains socket, therefore the mains plug shall be readily
operable.
Installation
Be sure to contact
a location with heavy dust, high or low temperatures, high humidity, and exposed
to chemical substances and where it operates for 24 hours such as at airports,
train stations etc.
Failure to do so may cause serious damage to your monitor.
Place your monitor in a location with low humidity and a minimum of
dust.
Do not drop the monitor when moving it.
A surge may be caused by the separation and may damage the monitor.
l
If the connector or plug of the power cord is dusty, clean it with a dry
l
cloth.
Using the power cord with a dusty plug or connector may cause electric
l
shock or fire.
This may cause electric shock or fire.
l
an authorized Service
Failure to do so may cause electric shock or fire inside the monitor.
l
Center, when installing your monitor in
Advertisement
