Setting Options On The General Tab - Brady label maker Manual

You'll see the a Properties screen with tabs and options appropriate
to the object selected. This is a sample Text Properties screen:
Available on
all systems,
for all objects.
For bar
codes, limited
to 0 and 90.
Available on all
systems, for all
objects
The values shown on the screen are the current values of the selected
text object.
Note: Object Properties screens are not accessible from the Pipe

Setting options on the General tab

The General tab appears on the Properties screens for every type of
object. Use the options on the General tab to set the rotation, the fill,
the cut options, the line width, and to begin the select color process
Note: As noted below, options offered on the General tab vary
¡
7-34
Changing Objects
Figure 7-16. A generic Properties General tab.
Marker or Right-To-Know applications. You must use the
<Preferences> key to change properties for those specialty
applications.
according to your system features.
Print object is
assumed on
Monocolor
and Multicolor
systems
Available on
Color & Cut
system only
Available on
all systems,
for all objects