Brady label maker Manual page 159

The tab options are:
General
Rotation
No fill/Solid fill
Print/Cut out
Cut bounding
box
Weeding
For all systems. Use the scroll arrows to
choose from the list of rotation angles. For
example, to rotate an object 45 degrees,
choose 45.
For bar code objects, the only valid
Note:
values are 0 and 90 degrees.
After rotating an object, you may not set an
absolute size for that object. You may,
however, use the Increase Size and
Decrease Size tools to change the size. (See
Using Increase Size and Decrease
Size on page 7-27)
These options appear on the HotShape
Properties General tab only. Select to set the
default fill for the HotShape object. The fill
is the background pattern inside the object.
Choose:
• No fill to leave objects transparent.
• Solid fill to make the background inside
the object a solid color.
For the Color & Cut system only. Set to
indicate that the object is for printing or to
be cut out. In the Monocolor and Multicolor
systems, print object is the only option. See
Creating Cut Out Objects on page 10-4 for
complete information.
For the Color & Cut system only. Use to
apply a bounding box to a print object, so the
object can be cut out. See Cutting Around
Objects on page 10-9.
For the Color & Cut system only. Use to
apply a cut around the outside of a cut text
object. You can then strip the waste from
around the text. See Weeding cut out text
objects on page 10-6.
¡
7-35
Working with Objects