Marking Of Io-Link I/O Modules; Factory Markings - Siemens SIMATIC ET 200AL System Manual

5.6

Marking of IO-Link I/O modules

5.6.1

Factory markings

Introduction
For better orientation, the IO-Link I/O modules are furnished with various markings that
support you when configuring and connecting the modules.
Marking of the interfaces
The interfaces of the modules are factory-labeled.
The table below shows the labeling of the interfaces.
Table 5- 2
interface
IO-Link
I/O input and output interfaces
Additional power supply
Pin assignment
The pin assignments of the various interfaces are lasered at the factory, on the side of every
module.
IO-Link I/O modules
System Manual, 10/2020, A5E48755395-AA
Interface labeling
5.6 Marking of IO-Link I/O modules
Labeling
X35 (IO-Link)
X10 ... X17
X80 (DC24V)
Connecting
41