Preface - Siemens SIMATIC ET 200AL System Manual

Preface

Purpose of the documentation
This documentation provides you with important information on how to configure, install,
wire and commission the IO-Link I/O modules of the SIMATIC ET 200AL distributed I/O system.
Basic knowledge required
A basic knowledge of automation technology is required to understand the documentation.
Validity of the documentation
This documentation applies to the IO-Link I/O modules of the SIMATIC ET 200AL distributed
I/O system.
Conventions
Observe the notes labeled as follows:
Note
A note contains important information regarding:
• The product described in the documentation
• The handling of the product
• The part of the documentation to which special attention should be paid in order to avoid
Recycling and disposal
For environmentally compatible recycling and disposal of your electronic waste, contact a
company certified for the disposal of electronic waste. Dispose of the equipment according to
the applicable regulations in your country.
Additional support
• Information about Technical Support is available in section Siemens Industry Online
• Information about the online catalog and online order system is available in section
• The range of technical documentation for the individual SIMATIC products and systems
IO-Link I/O modules
System Manual, 10/2020, A5E48755395-AA
damage.
Support (Page 4).
Industry Mall (Page 5).
can be found on the Internet (http://www.siemens.com/simatic-tech-doku-portal).
3