Fluke i3000s Flex Series Instruction Sheet page 8

sales@GlobalTestSupply.com
i3000/i2000 English Instruction Sheet
2. Wrap the flexible measuring head around the conductor to
be tested in a close coupling manner.
3. Energize the circuit under test.
4. For most accurate measurement, centre the flexible head
around the conductor.
5. Locate coupling away from the nearby conductors.
 Warning
To prevent electric shock or personal injury:
• Do not use the flexible current probe to
measure bare conductors unless wearing
protective clothing suitable for high voltage
work.
• Always use appropriate equipment for personal
protection. When installed on bare
conductors/busbars, the product must be within
a suitable enclosure.
Fluke-Direct
Page 8
Ieb0001.eps
.com
1.888.610.7664