Specifications; Electrical Characteristics - Fluke i3000s Flex Series Instruction Sheet

sales@GlobalTestSupply.com
i3000/i2000 English Instruction Sheet
Symbols
The following table shows the symbols used on the product
and/or in this manual.
Symbol
This product complies with the WEEE Directive marking
requirements. The affixed label indicates that you must
not discard this electrical/electronic product in domestic
household waste. Product Category: With reference to

the equipment types in the WEEE Directive Annex I, this
product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product
as unsorted municipal waste.

WARNING - RISK OF DANGER.
WARNING. HAZARDOUS VOLTAGE. Risk of electric

shock.

Consult user documentation.
Measurement Category III is applicable to test and

measuring circuits connected to the distribution part of
the building's low-voltage MAINS installation.

Double Insulated
Do not apply around or remove from uninsulated

hazardous live conductors without taking additional
protective measures.
Conforms to European Union directives.


Conforms to relevant South Korean EMC Standards.
Certified by CSA Group to North American safety

standards.

Specifications

Electrical Characteristics

Measuring ranges
i3000s (24 and 36 Flex)
i2000 Flex
Output sensitivity
Accuracy (at 25 ºC)
Frequency range
i3000s (24 and 36 Flex)
i2000 Flex
Fluke-Direct
Page 3
Description
30 A/300 A/3000 A AC, switch
selectable
20 A/200 A/2000 A AC, switch
selectable
100 mV/10 mV/1 mV per A
(AC coupled)
±1 % of range (45 Hz to 65 Hz)
10 Hz to 50 kHz (-3 dB typical)
10 Hz to 20 kHz (-1 dB typical)
.com
1.888.610.7664