Installation - Daikin UHA075B5 Catalogue/Engineering Data

Installation

Working condition
Item
Power supply voltage
Power supply frequency
Variations between phases Rated voltage ±2%
Air quality
Flow rate of chilled water
Pressure of chilled water
Quality of water
Installation site
Ambient temp.
Relative humidity
Note:
1. The unit is strictly tested before delivery and can work safely in the rated working conditions.
2. For the performance of the unit in different working conditions, please refer to performenc data.
3. This is the normal operating temperature range for the unit. Beyond this temperature range, the unit
can only operate for a short moment before a failure alarm is triggered.
Installation dimensios and environment limits
Units must be installed by DAIKIN service staff or by specially trained personnel.
Units must installed by following relevant national and local electric, building and environment protection
standards as well as the installation manual.
Foundation bolts position
UHA075/100B5
Rated voltage ±10%
Rated frequency ±1%
Must not contain solute that can corrode copper, aluminum or iron.
0.5 - 2.0m/s
< 1.0Mpa
"Must not contain solute that can corrode copper, iron, or welding material.
For details on the water quality requirements, see Water Quality Management."
Take anti-snow and ventilation measures as required.
Refer to the Performae Data.
<90%
>1390×(N-1)+1790
445 900 >490 900
Description
Foundation bolt M12x200
900 445
Unit:mm
17