Switching Your Pdp Display On And Off; Choosing Your Language - Samsung PPM42M6HS Owner's Instructions Manual

Switching Your PDP Display On and Off

The mains lead is attached to the rear of your PDP Display.
1
Plug the mains lead into an appropriate socket.
Result: The Standby indicator on the front of the PDP Display
lights up.
➢
The main voltage is indicated on the rear of the PDP
Display and the frequency is 50 or 60Hz.
2
Press the " " button on the front of the PDP Display (or the ON
( ) button on the remote control) to switch the PDP Display on.
3
To switch your PDP Display off, press the "
the OFF ( ) button on the remote control).

Choosing Your Language

When you start using your PDP Display for the first time, you must
select the language which will be used for displaying menus and
indications.
1
Press the MENU (
Result: The main menu is displayed.
2 Press the ... or † button to select Setup.
Result: The Setup menu is displayed.
3
Press the ENTER (
Press the ... or † button to select Language.
4
Press the ENTER (
Result: The available languages are listed.
Select the appropriate language by pressing the ... or † button.
5
Press the ENTER (
6
Press the EXIT button to exit.
" button again (or
) button.
) button.
) button.
) button.
Front of the PDP Display
Setup
Time
Language : English
PC
Move Enter Return
Setup
Time
English
Language : English
Français
PC
Deutsch
Italiano
Español
Português
† †
Move Enter Return
English - 15