Dvd Playback Mode; Setting The Drc (Dynamic Range; Setting The Av Sync; Setting The Hdmi Audio - Samsung HT-X810 User Manual

Hide thumbs Also See for HT-X810:
Table of Contents

Advertisement

system setup

DVD PLAYBACK MODE

Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to
DVD-Video mode.
1.
Press the MENU button while the disc tray is open.
Press the Cursor ▼ button to move to Setup and then press the
2.
ENTER or ► button.
Press the Cursor ▼ button to move to DVD TYPE and then press
3.
the ENTER or ► button.
Press the Cursor ▲,▼ button to move to DVD VIDEO and then press
4.
the ENTER button.
Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
DVD VIDEO : Set to play the DVD video contents contained on
a DVD audio disc.
DVD AUDIO : Set to play the default DVD audio.
M
DVD Play mode is set to DVD Audio as factory default setting.
Powering off the main unit will automatically switch to the DVD Audio mode.
DviX (R) Registration
Please use the Registration code to register this player with the DivX (R) video on demand format.
To learn more, go to www.divx.com/vod.
SETTING THE DRC (DYNAMIC RANGE COMPRESSION)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby
Digital sound when watching movies at low volume at night.
1.
In Stop mode, press the MENU button.
Press the Cursor ▼ button to move to Audio and then press the
2.
ENTER or ► button.
Press the Cursor ▼ button to move to DRC and then press the
3.
ENTER or ► button.
4.
Press the Cursor
,
to adjust the DRC.
When the Cursor
button is pressed, the effect is greater, and
when the Cursor
button is pressed, the effect is smaller.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
46
HT-X810_GB_0319.indd
HT-X810_GB_0319.indd
46-47
46-47
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
EXIT
RETURN
MOVE
ENTER
RETURN
EXIT
CHANGE
RETURN
EXIT

SETTING THE AV SYNC

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the
audio delay time to to match the video.
1.
In Stop mode, press the MENU button.
Press the Cursor ▼ button to move to Audio and then press the
2.
ENTER or ► button.
Press the Cursor ▼ button to move to AV-SYNC and then press the
3.
ENTER or ► button.
4.
Press the Cursor
,
button to select the AV-SYNC Delay Time
and then press the ENTER button.
You can set the audio delay time between 0 ms and 300 ms.
Set it to the optimal status.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.

SETTING THE HDMI AUDIO

The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1.
In Stop mode, press the MENU button.
2.
Press the Cursor
button to move to Audio and then press
the ENTER or ► button.
3.
Press the Cursor
button to move to HDMI AUDIO and then
press the ENTER or ► button.
4.
Press the Cursor
,
button to select ON or OFF and then press
the ENTER button.
• ON : Both video and audio signals are transmitted over the HDMI
connection cable, and audio is output through your
TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only,
and audio is output through the home cinema speakers only.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
M
The default setting of this function is HDMI AUDIO OFF.
HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.

SETTING THE AUDIO

Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
Press the SOUND EDIT button and then press the Cursor
, button.
Adjusting Front Speaker Balance
You can select between 00, -06, and OFF.
The volume decreases as you move closer to –6.
Adjusting Subwoofer Speaker Level
The volume level can be adjusted in steps from +6dB to –6dB.
The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
47
2008-3-21
2008-3-21
8:41:41
8:41:41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents