Dvd Audio Disc Playback Mode; Setting The Speaker Mode - Samsung HT-P40 Instruction Manual

DVD Audio Disc Playback Mode

Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
1
3
Note
•
DVD Play mode is set to DVD Audio
as factory default setting.
DivX (R) registration
45
Downloaded From TheatreSystem-Manual.com Manuals
Press Cursor
Press the MENU
2
button to move to
button while the
'Setup' and then
disc tray is open.
press ENTER button.
Press Cursor
Press Cursor ,
4
button to move to button to move to
'DVD TYPE' and then
'DVD VIDEO' and then
press ENTER button. press ENTER button.
•
Set steps 1 ~ 4 again if you want to
switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
•
DVD VIDEO : set to play the DVD video
•
DVD AUDIO : set to play the default
•
Please use the Registration code to register this player
with the DivX (R) video on demand format. To learn more,
go to www.divx.com/vod.

Setting the Speaker Mode

Signal outputs and frequency responses from the speakers will automatically be adjusted according to your
speaker configuration and whether certain speakers are used or not.
In Stop mode,
1
press MENU
button.
In the Speaker
3
Setup, press the
ENTER button again.
contents contained on a
DVD audio disc.
SMALL : Select this when using the speakers.
DVD audio.
NONE : Select this when no speakers are connected.
Note
•
Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 55).
Press Cursor
2
button to move to
'Audio' and then
press ENTER button.
Press Cursor , ,
4 , buttons to move
to the desired
speaker and then
press ENTER button.
•
For C, LS, and RS, each time the button
is pressed, the mode switches
alternately as follows: SMALL NONE.
•
For L and R, the mode is set to SMALL.
GB
46