Samsung HT-X810 User Manual page 12

connections
CONNECTING AUDIO FROM EXTERNAL COMPONENTS (CON'T)
AUX2 : Rear Panel
HDMI OUT
Audio Cable (not supplied)
If the external analog component
has only one Audio Out, connect
either left or right.
External Analog Component
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
1. Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of the external analog component.
•
Be sure to match connector colors.
2. Press the AUX button on the remote control to select AUX 2 input.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD ¨ D.IN ¨ AUX 1 ¨ AUX 2 ¨ USB ¨ BT AUDIO ¨ FM.
M

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the Digital Input (OPTICAL) on the Home Cinema to the Digital Output of the external digital
component.
2. Press the AUX button on the remote control to select DIGITAL IN.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD ¨ D.IN ¨ AUX 1 ¨ AUX 2 ¨ USB ¨ BT AUDIO ¨ FM.
22
HT-X810_GB_0319.indd HT-X810_GB_0319.indd 22-23 22-23
OPTICAL : Rear Panel
HDMI OUT
Optical Cable
(not supplied)
External Digital Component
CONNECTING THE FM ANTENNA
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2. Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it
to a wall or other rigid surface.
HDMI OUT
M

This unit does not receive AM broadcasts.
FM Antenna
(supplied)
23
2008-3-21 2008-3-21 8:40:54 8:40:54