Chapter 7 Installing The Drivers; Sas Card Driver Installation And Settings; For Primergy; Other Companies' Industry Standard Servers - Fujitsu ETERNUS DX Configuration Manual

Chapter 7
Installing the Drivers
7.1

SAS Card Driver Installation and Settings

Install the SAS card on the server that is connected to ETERNUS DX storage systems.
7.1.1

For PRIMERGY

When a PRIMERGY server is connected to the ETERNUS DX, install the SAS card and driver according to the
following manuals provided with the SAS card.
Manual that is provided with the SAS card [PG-228B/BL, PY-SC1Y0L]
•
Manual that is provided with the SAS card [PG-22DC/PG-22DCL, PY-SC2Z0]
•
Manual that is provided with the SAS card [PY-SCD08]
•
• User's Guide of PRIMERGY SAS card
7.1.2

Other Companies' Industry Standard Servers

When an industry standard server of another company is connected to the ETERNUS DX, install the SAS card
and driver according to that company's specific procedures for servers and SAS cards.
7.2

Multipath Environment Configuration

Multipath environment configuration differs depending on the multipath driver that is used.
When the driver for ETERNUS DX storage systems is used
•
Refer to "7.2.1 ETERNUS Multipath Driver" (page
•
When the standard multipath driver (msdsm) for Windows Server
®
Server 2012 R2, Windows Server
Refer to "7.2.2 Standard Multipath Driver (msdsm) for Windows Server
7.2.1

ETERNUS Multipath Driver

Install the ETERNUS Multipath Driver as required.
Refer to "3.4 Notes about Driver for ETERNUS DX Storage Systems" (page 10)
Multipath Driver.
For the procedure about how to install (or uninstall), setup, and use the ETERNUS Multipath Driver, refer to
the ETERNUS Multipath Driver manuals.
®
2012, Windows Server
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows
Copyright 2020 FUJITSU LIMITED
21).
®
2019, Windows Server
®
2008 R2, or Windows Server
®
21
®
2016, Windows
®
2008 is used
" (page 22).
for notes about the ETERNUS
®
P3AM-3442-18ENZ0