Chapter 5 Setting Up The Sas Switches - Fujitsu ETERNUS DX Configuration Manual

Chapter 5
Setting Up the SAS Switches
The following describes the required settings when connecting the server and the ETERNUS DX storage sys-
tems using a SAS switch. For details, refer to the SAS switch manual.
The following examples show configurations in which a server is connected to a SAS switch with zoning.
The following example shows a configuration in which multiple servers are connected to multiple CAs.
ZONE1
Port0
Port1
Name : Server#1
Port0 Port1
ZONE2
Port2 Port4 Port6
SAS switch
Port3 Port5 Port7
Port0 Port1
CM0
ETERNUS DX
Name : RAID#1
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows
Copyright 2020 FUJITSU LIMITED
Name : Server#2
Port0
ZONE3
Port0 Port2
SAS switch
Port1 Port3
Port0 Port1
CM1
18
Port1
ZONE4
Port4 Port6
Port5 Port7
®
P3AM-3442-18ENZ0