General Description; Function Description - Grizzly AGS 360 Lion Translation Of The Original Instructions For Use

Risk of electric shock.
Disconnect the charger from the
•
mains before closing or opening
connection to the battery / power
tool / device.
• Keep the charger clean and away
from wet and rain. Do not use the
charger outdoors. Dirt and the entry
of water increase the risk of electric
shock.
• Operate the charger only with the
appropriate original batteries.
Charging other batteries may result in
injuries and risk of fire.
Avoid mechanical damage to the
•
charger. This can result in internal
short circuits.
Do not operate the charger on a
•
combustible surface (e.g. paper,
textiles). Risk of fire due to heating
during charging.
• If the power cable for this equipment
is damaged, it must be replaced by
the manufacturer, a customer service
agent of the same or a similarly quali-
fied person in order to prevent haz-
ards.
• Do not use the charger to charge non-
rechargeable batteries.
6) RESIDUAL RISKS
Even if this power tool is operated in ac-
cordance with the instructions, some re-
sidual risks always remain. The following
hazards may occur in connection with the
construction and design of this power tool:
a) Cuts
b) Hearing damage if no suitable hearing
protection is worn.
c) Damage to health as a result of hand-
arm vibrations if the equipment is
used over a prolonged period or not
properly operated and maintained.
Warning! This power tool gener-
ates an electromagnetic field dur-
ing operation. Under certain condi-
tions, this field may impair active
or passive medical implants. To
reduce the risk of serious or fatal
injuries, we recommend that peo-
ple with medical implants consult
their doctors and the manufacturer
of the medical implant before oper-
ating the machine.

General description

The illustration how to handle the
appliance can be found on the
pages 2-3.

Function description

The cordless grass and shrub shear is
a combination unit with two interchange-
able cutting devices. These are coated
with plastic to prevent rust. For use as a
shrub trimmer, a double-sided blade block
is used as the cutting head. When cutting,
the blades oscillate linearly against an
unsharpened cutting plate. The catching
blades are round off at the side to prevent
accidents, and positioned in an offset ar-
rangement to reduce the risk of injury. A
cutting head with several blades is pro-
vided for use as a grass trimmer. This also
oscillates on a bladed plate, producing the
same movement as a pair of scissors. The
unit is equipped with a telescopic shaft and
rollers for increased working speed and
comfort. Please read the following descrip-
tions for the function of the various con-
trolling parts of the unit.
GB
73