Changing the Preset Station Table
You can rearrange the Station Table and give different
programme numbers to the stations listed according to
your own preferences.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
the Install option.
❿
3
Press the OK or
buttons to select this option.
Result: The Install menu is displayed.
Auto Setup
Manual Setup
TV System
VCR Output CH
4
Press the corresponding
Manual Setup option is selected.
❿
5
Press the OK or
button to select this option.
Result: The TV STATION TABLE menu is displayed.
TV STATION TABLE
PR
CH
NAME
- - - -
1
21
2
3
4
5
DELETE : CLEAR
TV STATION TABLE
PR
CH
NAME
1
2
- - - -
3
21
4
5
DELETE : CLEAR
6
Press the corresponding
required preset TV programme is selected.
Result: The selected station is displayed at the
same time on the television screen.
7
To change the programme number assigned to a
station press the OK button on the remote control.
(For example, To move a TV station in programme
1 to programme 3)
8
or
Press the
buttons to select required
❷
position. And then press OK again to swap the
position.
9
On completion, press the RETURN button four
times to exit the menu.
❿
.
,
buttons to select
❷
Install
: K
: CH 36
or
buttons, until the
❷
DEC
OFF
SWAPPING : OK
RETURN
DEC
OFF
SWAPPING : OK
RETURN
or
buttons, until the
❷
Selecting the RF OUT Sound Mode
(B/G-D/K)
You can choose the sound mode (B/G or D/K)
according to the TV set connected to your VCR.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
the Install option.
3
Press the OK or
Result: The Install menu is displayed.
Auto Setup
Manual Setup
TV System
VCR Output CH
4
Press the OK or
option is selected.
5
Press the OK or
6
On completion, press RETURN to exit the menu.
ENG-14
❿
,
buttons to select
❷
❿
to select this option.
Install
K
: K
G
: CH 36
❿
buttons, until the TV System
❿
buttons to select G or K.
.