Clearing A Preset Station - Samsung SV-DVD440 User Manual

➛ or ❿
8
Press the buttons to start scanning the
channels.
Result: The frequency band is scanned and the first
station found is displayed.
9
Press the button, until the DECODER is selected.
❷
❿
10
Press the button to activate or deactivate use of the
decoder for the TV station, if necessary.
11 or
Press the buttons until the NAME is selected.
❷
The station name is set automatically from the
broadcast signal.
12
To change the programme's name, press the
Result: The first letter of the name flashes.
13
To... Then...
Select a character Press the
the in the namerequired
character is displayed (letters,
numbers or "-" character).
Move to the next or Press the
previous character respectively.
14
If you... Then...
Wish to store the
station displayed
adjust the picture, if necessary.
Do not wish to
store the station
displayed
15
Repeat this procedure from Step 6 onwards, until
all the required stations have been stored.
16
On completion, press the RETURN button three
times to exit the menu.
❿
button.
or
button until
❷
➛ or ❿
buttons
or
Press the buttons
❷
until the MFT is selected.
➛ or ❿
Press the buttons to
Press OK to store the station
or
Press the buttons
❷
until the CH is selected.
➛ or ❿
Press the buttons to
go on scanning the
frequency band and display
the next station
Go back to the beginning of
Step 14

Clearing a Preset Station

If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
the Install option.
3
Press the OK or
Result: The Install menu is displayed.
Auto Setup
Manual Setup
TV System
VCR Output CH
4
Press the corresponding
Manual Setup option is selected.
5
Press the OK or
Result: The TV STATION TABLE menu is displayed.
TV STATION TABLE
PR CH
1 21
2
3
4
5
DELETE : CLEAR
6
Press the corresponding
required preset TV station (PR) is selected.
7
Press the CLEAR button.
8
Repeat the same procedure from Step 6 onwards
until all the required stations have been cleared.
9
On completion, press the RETURN button four
times to exit the menu.
ENG-13
,
buttons to select
❷
❿
to select this option.
Install
: K
: CH 36
or
buttons, until the
❷
❿
to select a Manual Setup option.
NAME DEC
- - - -
OFF
SWAPPING : OK
RETURN
or
buttons, until the
❷
❿
.