Selecting The Cassette Type; Selecting The Recording Speed; Nicam(Option) - Samsung SV-DVD1 Instruction Manual

01479A DVD-V5000/XSA-GB2 9/5/56 8:04 AM Page 24

Selecting the Cassette Type

GB
Other models
O S D : O N
TAPE SELECT : E 1 8 0
COLOUR SYSTEM : A U T O
I P C : O N
N I C A M : O N
RECORD SOURCE : A U T O
E N D :S E T U P
Australia model
O S D : O N
TAPE SELECT : E 1 8 0
COLOUR SYSTEM : A U T O
I P C : O N
RECORD SOURCE : A U T O
E N D :S E T U P

Selecting the Recording Speed

Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
24
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
Press SETUP on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding , or , buttons to select the
USER SET option.
3 Press the ENTER button to select this option.
4 Press the corresponding or buttons, until the cursor is placed
in front of the TAPE SELECT option.
5 Press the or buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E 300 E260
6
Press SETUP twice to exit the menu.
You can record a cassette at two different speeds:
SP (Standard Play)
LP (Long Play)
In Long Play modes:
Each cassette lasts twice as long
The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode is displayed.
S P
In long play mode is displayed.
L P

NICAM(OPTION)

NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 33.
1
Press SETUP on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding , or , buttons to select the
USER SET option.
3
Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the cursor is
placed in front of the N I C A M option.
5
To... Press or , until...
Mono mode O F F is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode O N is displayed.
ON: Normally set at this position.
6
On completion, press SETUP twice to exit the menu.
This option is not available Australia model.
GB
USER SET
E N T E R E N D :S E T U P
O S D : O N
TAPE SELECT : E 1 8 0
COLOUR SYSTEM : A U T O
I P C : O N
N I C A M : O N
RECORD SOURCE : A U T O
E N D :S E T U P
25