Table of Contents
Advertisement
01479A DVD-V5000/XSA-GB3
9/5/56 8:06 AM
Page 28
Using the Timer Programming Feature
GB
1/JAN SAT
1 2 : 0 9
PR DAY
START S T O P
1 SA 9 1 2 : 0 0 1 2 : 5 0 SP
-- ---- - - : - - - - : - - - -
-- ---- - - : - - - - : - - - -
-- ---- - - : - - - - : - - - -
-- ---- - - : - - - - : - - - -
-- ---- - - : - - - - : - - - -
D E L E T E
:C L E A R
S E T U P
18
28
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
Before presetting a recording, check that the date and
time are correct.
1
Insert the cassette and press TIMER on the remote control.
Result:
The timer programme is displayed.
2
Press to select the input source.
3
Select the required station by pressing the
,
buttons.
4
Press
to select the recording day.
5
Select the required day by pressing the
or
buttons.
6
Press
to select the recording start time.
7
Select the required hour value by pressing the
or
8
Press
to select the minutes.
9
Select the required minute value by pressing the
10
Press
to select the recording end time.
11
Select the required recording end time by pressing the
buttons, following the same procedure as when selecting the
recording start time.
12
Press
to select the recording speed.
13
Press the
or
buttons to select the
(Standard Play),
S P
(Long Play),
A U T O
(Auto Tape Speed Select) recording speeds.
14
When you have finished, press the SETUP button.
15
Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
Auto Tape Speed Select. The DVD-VCR's "Auto Tape
Speed Select" function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
Checking a Preset Recording
You can check your preset recordings:
When you have finished presetting the DVD-VCR
If you have forgotten which programmes will be
recorded
1
Press TIMER on the remote control.
Result:
The timer programme is displayed.
2
Press the
or
3
Press the
or
required. For more details, refer to the previous page.
4
On completion, press SETUP twice.
buttons.
or
buttons.
or
Cancelling a Preset Recording
L P
You can cancel any programmes that are:
Incorrect
No longer required
1
Press TIMER on the remote control.
Result:
The timer programme is displayed.
2
Select the programme to be cancelled by pressing the
buttons.
3
Press the CLEAR button to cancel the selected programme.
Result:
All the recording information is deleted and the broad-
cast will not be recorded.
4
On completion, press SETUP twice.
buttons to select the required programme.
buttons to select and change any values as
o r
GB
1/JAN SAT
1 2 : 0 9
PR DAY
START S T O P
1 SA 9 1 2 : 0 0 1 2 : 5 0 SP
-- ---- - - : - - - - : - - - -
-- ---- - - : - - - - : - - - -
-- ---- - - : - - - - : - - - -
-- ---- - - : - - - - : - - - -
-- ---- - - : - - - - : - - - -
S E T :
D E L E T E
:C L E A R
S E T U P
1/JAN SAT
1 2 : 0 9
PR DAY
START S T O P
1 SA 9 1 2 : 0 0 1 2 : 5 0 SP
-- ---- - - : - - - - : - - - -
-- ---- - - : - - - - : - - - -
-- ---- - - : - - - - : - - - -
-- ---- - - : - - - - : - - - -
-- ---- - - : - - - - : - - - -
S E T :
D E L E T E
:C L E A R
S E T U P
4
29
Hide quick links:
Advertisement
Table of Contents
